Description
| Brand |
Rosemount |
|---|
| Rosemount MS Magnetic Sensor MS100 for Slurry Applications, 10 inch (DN250) | |
|---|---|
| Reference Accuracy: ±0.25% with optional ±0.15% high accuracy
Line Size: 3” (80mm) to 36” (900mm) Liner Material Options: PTFE, PFA+, Polyurethane, Neoprene, Linatex Natural Rubber, Adiprene Electrode Options: Material: 316L Stainless Steel, Nickel Alloy, Platinum, Tantalum, Titanium. Type: Standard, Bullet, Flat. Optional 3rd electrode for grounding Flange Options: Connections: Slip-on, weld-neck, grooved coupling. Ratings: ASME Class 150 – 2500, EN-1092 PN10 – PN40, AS2129 Table D and E, JIS B2220 10K – 40K, AS4087 PN16 – PN35. Materials: Carbon Steel, 304/304L SST, 316/316L SST. Additional flange ratings and materials may be available upon request Approvals: Ordinary Locations, ATEX Non-Sparking; Dust, Class I Div 2; Dust, Class I Zone 2; Dust, IECEx Non-Sparking; Dust, ATEX increased safety; Dust, Class I Zone1; Dust, IECEx Increase Safety; Dust. Higher level approvals include Intrinsically Safe Electrodes Enclosure Type: Type 4X. IP66, IP67, IP68, IP74 Compatibility: 8782 Slurry Transmitter for optimum performance in high noise applications. 8712EM and 8732EM (remote mount only) for standard magnetic flow meter performance |
|
| Rosemount 8712E Magnetic Flow Meter Transmitter | |
|---|---|
| Accuracy: Up to ±0.15% of volumetric flow rate accuracy over 13:1 flow turndowns, ±0.25% over 40:1 flow turndown
Diagnostic: In Situ Meter Verification, Grounding & Wiring Fault Detection, High Process Noise Detection, Tunable Empty Pipe Detection, Transmitter Fault Detection, Sensor Fault Detection Compatibility: All Rosemount manufactured Sensors: 8705, 8711, 8721, 8707. Universal capabilities allow E-Series transmitters to be compatible with AC and DC powered sensors from other manufacturers Power Supply: 90-250 VAC, 50-60 Hz or 12-42 VDC Power consumption: 15 W maximum – DC, 40 VA maximum – AC Enclosure Rating: 8712E: Type 4x, IP66 |
|
Rosemount MS Magnetic Sensor MS100 for Slurry Applications, 10 inch (DN250)
- Capability to handle extremely noisy applications while delivering stable flow outputs better than a standard magnetic flow meter when paired with the 8782 transmitter
- Increased signal strengths allows for more precise flow measurement and reduce process variability even in hard to measure flows when paired with the 8782 transmitter
- Reduce sensor inventory with a dual calibration option
- Ensure reliability in the harshest environments with an all-welded sensor housing
- Guard against installation damage and leading-edge wear with optional lining protectors
- Avoid process shutdown with a removable and replaceable terminal block that enables repairs in the field
- Capture any potential process fluid leakage with optional secondary containment compartments
- Minimize maintenance and repair with an obstructionless design featuring no moving parts, ideal for metering conductive slurries
- Pair the MS Slurry Sensor with the 8782 Slurry Transmitter for optimum performance in high noise applications.
Rosemount 8712E Magnetic Flow Meter Transmitter
- Intuitive Local Operator Interface with dedicated keys for ease of use
- Maximize uptime with Smart Meter Verification which monitors meter health and performance without stopping the process
- Optimize control in noisy applications with High Process Noise diagnostic and Selectable Coil Drive Frequency options
- Tunable Empty Pipe diagnostic minimizes issues and false readings when the pipe is empty
- Quickly verify installation integrity with Ground and Wiring Fault Detection diagnostic
- Universal transmitter capabilities enable reduced inventory and consistent interface for any magnetic flow meter sensor